-
Anonymous users2024-01-24This is due to the fact that after a long time, the toilet sanitary ware is not flexible to open under the pollution of impurities such as scale, you can clean the sanitary ware part, adjust the length of the lower ejector rod of the double button on the lid, and adjust the lower water level adjustment rod, which should be fine.
-
Anonymous users2024-01-23Yes, the water piece in the middle can be unscrewed.
01 Check the toilet for cracks first.
Please pay special attention to the place where you need to lift the toilet with your hands, because the toilet is made of ceramic magnet and can cut people like glass, so wear thick work gloves when moving the toilet. >>>More
Check to see if the ball valve inside is not in the specified position, it may be that the ball valve is stuck and the water inlet pipe is closed and water cannot be entered.
If the length of the pressure rod is not enough, it can not fully contact the internal pressure plate of the toilet, and the water cannot be opened, so after the key inspection, if it cannot be adjusted, it needs to be replaced with a new installation.
The problem you're talking about isn't complicated at all, as long as you do the following: >>>More
What you mean is that your water tank does not flush, but if it is not flushed, the water in the tank should always be full, the water tank will not enter the water when it is full, and you will not see the water spraying phenomenon, and there will be a small flow of water to the toilet, if you can send a photo after opening the top cover, it will be easy to analyze.