-
Anonymous users2024-01-24The gap must be hooked, because after the completion of the bricking, the joint is a very important link, so it is necessary, the tiling can not be completely without the gap, if the joint treatment is not done, the water on the ground will flow along the gap to the underground waterproof layer, and the waterproof layer will be corroded for a long time, so it must be done to hook the joint.
-
Anonymous users2024-01-23Tile as much as possible to hook the joint, the purpose is to be beautiful, the second is practical to prevent heat expansion and contraction, the impact on the tile, and you are in the bathroom, the moisture is relatively large, the joint also prevents moisture.
If the gap is not large (for example, seamless bricks are used), then there is generally no need to caulk; If the gap is obvious, then it is necessary to caulk with caulk. However, the color of the caulk does not need to be deliberately the same as the color of the floor tiles, because in daily life, these gaps will be "polluted" by dust, even if you use the same color as the floor tiles (light color), as long as the (light color) caulk will become black or gray (dark) over time. Therefore, the caulk for floor tiles can be used directly from cement.
The ground is covered with white cement.
Yes, but it's best to use a special caulk, and there are many colors to choose from
According to the relevant content of the atlas, the floor tiles should be jointed with plain cement slurry, and now the floor tiles that are not enough to be seamed are quite common, and they may be negotiated with the construction of the open posture unit and the supervision of the early unit, and the joints are not allowed. from the owner's home decoration net mountain laughs.
It will not damage the waterproof layer, because the main ingredient of the disinfectant is chlorine, which is irritating to the human respiratory tract, but there is no damage to cement, ceramic products, etc., and hospitals also use it to disinfect the environment.