There are two flush buttons on the toilet, what is the mystery?

Both buttons on the toilet are used to flush water, but they dispense with different amounts of water. The smaller ones take up one-third of the tank, while the larger button makes up two-thirds of the tank's water. Everyone chooses who to use according to the amount of excrement they have.

First, let's look at the structure of the tank. In general, the structure inside the toilet tank usually has floats, drains, inlet pipes, levers, plugs, and flush buttons. When combined, these elements form a complete flushing structure.

When we press the flush button after going to the toilet, we will lift the water by lever and then the tank will drain the water through the drain.

At this point, as the water level drops, the float will also drive the lever to pull up the inlet valve, so the water will start to enter the tank again. Football will also continue to rise due to buoyancy. Finally, the drive lever is pressed down against the plug and the water will again block the inlet. Then, a new round of rinsing can begin.

In fact, these two buttons are also designed to save water, and different flush volumes can be selected according to different situations, so that the toilet can be flushed clean, saving water without causing waste. The large button is usually used for defecation, while the small button is usually used for urination. Due to the different functions of the two buttons, the corresponding pressing method can be selected according to different situations, so as to achieve the effect of energy saving and water saving.

Gently press the large button, the small amount is more suitable for bowel movements. However, pressing the big button again is more suitable for situations where there is a large amount of bowel movements. If the urine output is low, simply rinse with a gentle press of the small button.

> if two buttons are pressed at the same time, the impulse is maximum and fullest. If your bowel movements are heavy or sticky and can't be washed off, you can choose to use this compression method to rinse.

In fact, these two buttons are also designed to save water, and you can also choose different flushing amounts according to different situations, so that you can not only flush the toilet, but also save water without causing waste.

In fact, these two buttons are the buttons for half water and full water drainage, the small button means that it is half water, and pressing it will not completely drain the water in the tank at one time.

So what does this have to do with the two buttons on the toilet seat? In fact, these two buttons are the buttons for half water and full water drainage, the small button means that it is half water, and pressing it will not completely discharge the water in the tank at one time, but only put half or one-third.

In fact, the two buttons on the toilet bowl have the effect of saving water, which is very practical.

This is completely two buttons, one large and one small, which determines the amount of water.

Shape. Most people know that this button is used to flush water, so many people press it casually after going to the toilet and don't know how to use them correctly.

For these two buttons, the flush volume of each button is different, some small and some large.

How to use the two buttons on the toilet flush tank The steps are as follows: Generally speaking, there will be some structures in the water tank of the flush toilet: float ball, water inlet pipe.