-
Anonymous users2024-01-24Condensation. 1. The indoor temperature is higher than the outdoor temperature. 2. The indoor humidity is high. 3. The heat preservation of single-layer glass is not good, and if vacuum glass is used, there is no such phenomenon or it is relatively rare.
-
Anonymous users2024-01-23This is normal, because the specific heat capacity of liquefied plastic steel glass is relatively low due to the temperature difference, so as soon as the temperature is cooled, the temperature difference will liquefy and form water droplets. It doesn't matter
-
Anonymous users2024-01-22This is normal, it is the water vapor in the air that cools the glass and condenses into water.
This depends on the color you like, and then there is a combination of the overall structure to install,
The plastic steel window glass on the balcony can be patched with plastic glue on the outside. >>>More
This phenomenon, there are generally two situations, one is that the plastic steel window is not strict, and it needs to be replaced, or the anti-friction strip inside is replaced to increase the tightness, and the other is that the wall next to the window is too large, and there is a gap between the wall and the window frame, in this case, it must be filled with cement first, and then a layer of waterproof plaster should be smeared. >>>More
1 Insufficient verticality of the installation, as well as uneven leveling, will also cause the fan to automatically move inward or outward. If the fitting is a hinge, it is recommended to add a wind brace under the fan, if the installation is a four-chain rod, use a screwdriver to tighten the screws of the slider on the four-chain rod.
It depends on your specific structure, how much area and total area of the live fan can be set in order to set the general price.