-
Anonymous users2024-01-24Opening... Check the direction of the circuit. Just find the place where the circuit is broken and connect...
There are two sets of power sources in the bathroom, one is the lighting and the other is the socket power.
-
Anonymous users2024-01-23You don't understand this, you can't move around, in a bathroom is not necessarily a route, you have to find an electrician to see,
-
Anonymous users2024-01-22Hehe, jump off a set of lines. Look at the main switch in your house is the one that tripped.
-
Anonymous users2024-01-21The air switch jumps and you can pull it up.
First check whether there is electricity in the bathroom, and then check whether the zero line is good, check whether there is electricity in a socket in the bathroom, if there is electricity but can not be used, the zero line is a problem, if there is no electricity, it is a line problem, then it is necessary to re-thread
1. In this case, it is most likely a circuit problem, or it is possible that the first socket line is open. >>>More
Check to see if there is electricity in the other plug-ins, if there is no electricity, see if the safety in the box is normal. Compare the other to see if there is any change, and then try again when it is back to normal.
The light is changed directly, and the hand does not touch the electricity inside. If you change the socket, you have to turn off the switch.
Cause analysis:1The toilet socket is a separate circuit, and the electrical box is empty and the terminal is loose or the terminal of the first power socket in the bathroom is loose and the contact is poor. >>>More