-
Anonymous users2024-01-241. Observe first: First of all, you should observe the shape of the bathroom and decide what shape of shower room to make; Observe the location of faucets, toilets and sinks; The location of the drain in the bathroom.
2. Customized products: According to the actual situation of the bathroom, decide whether to make swing doors or sliding doors; The way to open the door and the direction of the door must be decided first.
3. Measure the size of the shower room If the stone base of the shower room has been laid, it is necessary to observe it carefully.
Whether the straight edge of the stone foundation and the brick joint of the floor tile are parallel or not, it is possible to directly measure the size of the wall edge to the outer edge of the stone foundation; If the stone base is oblique, the measurement is much more complicated, it is best to take a 900 * 900 standard stone base on the stone base, and measure the size difference with a tape measure, so as to get the size of the shower room, the size must be accurate to the millimeter unit; And observe whether the height of the shower room can be used with the standard height, whether there are items such as water heaters that affect the height, it is recommended to use the standard height as much as possible.
4. Draw a sketch According to the results of on-site measurement, draw a sketch of the shower room, indicate the width and height, mark the direction of the shower room and the direction of the door, and mark the location of the sanitary ware that may interfere with the shower room, so that the designer can consider it carefully.
5. Mark out the special requirements: According to personal preference, indicate the frame color, material, glass color, glass pattern, whether to paste explosion-proof film, etc. Give the sketch to the shopping guide or designer, sign and confirm it, and then you can place an order for production.
<> 1. Measurement of straight line screens.
2. Determine the installation position of the linear screen, measure the upper and lower width between the two walls, and read the accuracy to the millimeter. The tape measure must be straightened and both ends at the same level to ensure accurate readings. >>>More
Basic size vs. minimum size.
1.Shower room width: >>>More
The purchase of the shower room should pay attention to:
1. Size. You need to determine how big you want to use your bathroom. >>>More
Note 1: The size of the bathroom determines the shape of the shower room. >>>More
1.Knock Material:
Most of the shower rooms are made of fully tempered glass, while the shower rooms made of ordinary glass are affected by external factors, such as hot water in autumn and winter, which may burst. There are also some manufacturers who cut corners to produce semi-tempered or hot-bent glass in order to reduce costs, which also buries potential safety hazards for health. Therefore, when choosing a shower room, you can use your knuckles to knock on the glass, the sound of tempered glass is crisper, and the sound of ordinary glass is duller. >>>More