-
Anonymous users2024-01-24Check to see if there is electricity in the other plug-ins, if there is no electricity, see if the safety in the box is normal. Compare the other to see if there is any change, and then try again when it is back to normal.
-
Anonymous users2024-01-23First, see if the total power supply is closed.
If the power supply is closed, find the property to deal with the repair.
-
Anonymous users2024-01-221. In this case, it is most likely a circuit problem, or it is possible that the first socket line is open.
2. Use a multimeter 250V AC file to check whether the bathroom is empty to see if there is electricity and whether the voltage is normal.
3. Check whether the first socket has electricity, if you don't know which socket is the first, then check them one by one.
4. Check the socket with a voltage tester and then use a multimeter to check the voltage, if the empty voltage is normal, and the socket is not fired, it may be a live wire problem.
Question: The toilet socket of the residents in the community is out of power, and the socket in the hall is normal.
The question socket comes with a waterproof housing.
Answer: Sometimes fog can get into the socket. My home is also equipped with a waterproof shell, and the mist emitted by the hot bath in winter sometimes invades into it, and there is a problem with the socket, but it is not excluded that other possibilities are recommended to ask professional maintenance workers to check Oh dear.
Ask how to determine where the problem is.
Sanitary napkin line issues.
Answer hello dear, the general situation is which of the possibilities I listed above If you still can't judge which one, it is still recommended to contact an electrical repairman to check it will be safer.
No matter what, you still have to put safety first [flowers] [flowers] [flowers].
I can't see it just by looking at the picture, it should be a problem with the wire, find a friend who understands electricity, pull the electric switch, and take it apart to see if the wire is connected wrong.
No, isn't it that you didn't find the location to open it, no one will (dare) paste it in the bathroom socket, after all, life is at stake, no matter how you decorate it, the socket will not be opened.
First check whether there is electricity in the bathroom, and then check whether the zero line is good, check whether there is electricity in a socket in the bathroom, if there is electricity but can not be used, the zero line is a problem, if there is no electricity, it is a line problem, then it is necessary to re-thread
You first look at whether the empty opening in the switch box has tripped, the bathroom environment is relatively harsh, the humidity is large, and it is easy to cause leakage tripping.
If the water cannot be sprayed, splashed, or sprayed onto the socket directly, there is no need to install a waterproof cover. If you want to equip it, it's easy to buy a waterproof and splashproof cover and put it on.