What s the matter with the smell of oil smoke in the living room of the newly renovated house

The flue outlet is a public flue, and the flue outlet has a cover, which is opened when the range hood is turned on, and closed when it is closed, so there will be no more problems in the future.

Plug the eye of the original public flue. But after a long time at home, the best way is to drill the fumes from the wall and discharge them out, and the fumes stick to the hinge, so the cover is not tight. In this case, it is likely that the common exhaust channel of the building has backfilled, and it is recommended to check the flue, and if there is backflow, it is recommended to install a device to prevent backflow of oily fumes.

It means that there is a problem with the reverse valve of the range hood seal in your house, and it is recommended to disassemble it to see if it is blocked, but not closed.

It is because the check valve of your flue and range hood are not sealed, when the people downstairs are cooking, the oil smoke will enter your home along the flue and range hood. Check the check valves of the flue and range hood.

The check valve is when the valve is open when the smoke is exhausted, and the valve is closed when the smoke is not discharged. If it's broken, it will come in through the check valve.

It's the flue in the kitchen. The flue should be taken care of. The smell of smoke will be small.

The kitchen flue is not equipped with a check valve, which is caused by the smell of oil smoke.

Hello, my house has just been installed, and the living room has the smell of cooking smoke in other people's houses, is there any good way to ask for it?

The home flue outlet is made with the male du of bai

Common flue, flue outlet.

There is a cover dao at the mouth, and when he turns on the range hood, he opens it inside, and when he closes the capacity, it will also be closed, and there will be no more problems with this problem in the future.

Plug the eye of the original public flue. But after a long time at home, the best way is to drill the fumes from the wall and discharge them out, and the fumes stick to the hinge, so the cover is not tight. In this case, it is likely that the common exhaust channel of the building has backfilled, and it is recommended to check the flue, and if there is backflow, it is recommended to install a device to prevent backflow of oily fumes.