How to decorate the living room stone line

Gypsum line is a kind of gypsum products, generally used in interior decoration as a corner line, around the edge of the roof, can be with a variety of patterns, which can pass through the water pipe. Practical and beautiful, practical and beautiful, low price, with fireproof, moisture-proof, heat preservation, sound insulation, heat insulation functions, and can play a luxurious decorative effect.

First of all, the top corner or other parts to be installed are nailed with cement steel nails on the wooden block, the general specification of the wooden block is 15 (thick) mm 60 (width) mm 50 (length) mm, the spacing is about 330mm, and the nailed wooden block must coincide with the seam of the slider on the angular line.

Before installing each corner, the carved slider in the corner line must be cut out of a complete flower, and the sliding edge must be removed so that the cover can be glued to the final nailing area.

Align the good angular line with the position of the wooden block on the top corner that has been nailed, push away the carved insert, drive in 2 3 round nails, push each nail forward a section, and the last interface is glued with the carved carved pre-cut glass glue to cover the nail hole to achieve a seamless effect.

Precautions. First, the purchase of gypsum line, the quality of gypsum, price, variety, when purchasing, should be selected with the height of the house, wall color, degree of decoration. Personal preference, match the plaster line. The effect will be different depending on the method of installation;

2. During installation, the gypsum line should be deformed, the joint should be smooth, the line body should be clean, and the line should be straight. The actions of the installer should be skilled, fast and neat;

3. It is best for oilers to have sandpaper grinding process and complete the repair; The effect should not be visible joints, defects, and the indoor environment can be integrated.

The key is not the primer, it is whether the base layer under your primer is firm, as the upstairs said if there is no problem with the gun nail, if it is sticky, it is not a problem to shovel the primer, it is best to shovel off the base layer of the original wall so that it is firm, if the base layer is not firm, the bottom is useless.

Generally, it doesn't matter, as long as there is no problem with the original treatment of the bottom layer, if you don't worry, you can slightly knock off a part to increase the stress area!

No, it is usually nailed directly with a gun, and if you are sticky, you have to remove it.

Yes, otherwise the gypsum will not be able to eat inside the wall skin, and it will open after a long time.