-
Anonymous users2024-01-24Three times, one wall. The thickness of each layer should not be exceeded, and attention should be paid to the corners and corners and around the water pipe. After doing it, do a 24-hour closed water test, and go downstairs to see if it's okay.
-
Anonymous users2024-01-23I don't seem to have heard of this kind of waterproofing, and I generally use waterproofing brushed up (such as the waterproof panther made in Shenzhen). Ground three times, on both sides of the wall. It's all brushed and stacked when it's dry.
-
Anonymous users2024-01-22Flexible waterproof good, and then better more than twice, at 1mmSafe and secure.
-
Anonymous users2024-01-21Mortar waterproofing generally belongs to rigid waterproofing, brushed 2 times, the thickness is about 3kg, the amount of material is 3kg square meters, acceptance, water storage for 48 hours without leakage.
Rigid waterproofing.
Rigid waterproof village materials are made of cement, sand and gravel as raw materials, or mixed with a small amount of admixtures, polymers and other materials, by adjusting the mix ratio or reducing porosity, changing the pore characteristics, increasing the compactness between the raw materials, etc., the cement mortar concrete with a certain anti-permeability ability is formulated into cement mortar concrete, which is summarized in the vernacular This waterproof material is made of mortar or concrete. It is characterized by brittle cracking of the waterproof layer when the tensile force of the waterproof layer is greater than the tensile strength of the waterproof material (including settlement deformation, temperature difference deformation, etc.), resulting in water leakage. >>>More
Of course, it is flexible waterproofing, the general steel waterproof effect is not good, and cracks will cause water seepage due to thermal expansion and cold contraction, and flexible waterproofing can avoid this phenomenon, and it is also a general waterproof method at present!
The bathroom is waterproof, and the surrounding walls need to be painted at a height of not less than 30 cm.
The first choice is acrylic waterproofing paint. It is a cost-effective bathroom waterproof material, which has very stable waterproof performance and environmental protection performance during use, and it also has strong anti-aging, which can be used in various complex decoration structures and can extend the service life of the toilet waterproof layer. >>>More
I can understand what you mean by flexible waterproofing, it should refer to problems like secondary drainage, it is very necessary, because the house decoration is not a problem of one or two years, if the bathroom has been subjected to damp pressure for a long time, even if there is waterproof paint, there will be some gaps that will seep into it, and the water will accumulate more and more over time, and when the water is more and volatile can not go out, it will find the exit, at that time, the wall or door, the wall and floor tile threshold of the bathroom and other places have become this exit, so the back wall of the bathroom of many families is always wet, The moldy joints of the wall tiles and the swelling of the door are caused by the failure to do this flexible waterproofing, so it is still necessary to do it.