-
Anonymous users2024-01-23Three wires are a main line (live wire), the other two wires are two light circuits for control, should be connected to a double switch, control two bulbs, you can use a multimeter to test it, whether it is two circuits, do not understand you can ask the electrician, hope to adopt.
-
Anonymous users2024-01-22Has your livewire been switched on? If you don't get in, you will throw the live wire into the switch.
Your lights are controlled with a wall switch, wrap the live wire, and connect the zero and control wires to the lights.
Your light is controlled by a remote control, wrap the control wire, and the zero and live wire can be fed into the controller.
If your switch is to control the interior lights. Because there is already a light in the bath bomb, you can omit your light, and you don't need to install a switch control line. If you want to control another lamp or mirror headlight, you can use the light control line in the bath bomb group to connect it in parallel to another lamp or mirror headlamp, and then the light switch on the bath bomb can control the lamp you want to control at the same time.
Can I plug an appliance into an outlet?
The line of fire can't be lowered so badly that only half of it is left? It's normal to have some zero bands, but not so high. Is there a problem with the measuring tool? >>>More
Of course, one route is controlled all the way, but some living room lights have a splitter, turn on one, light one, open twice, light the second. You can also install a splitter. However, it is generally not recommended, or you add carpentry to say, it is better to slotting and control line. >>>More
Of course, the bathroom and kitchen are done first, and the flooring is done after all the work is completed. >>>More
If you don't know, I don't know if it's a control line or a ground line, and if it's a zero line in blue, I can't tell.