Old house toilet cast iron sewer, please ask if you change the toilet and floor drain connected two

Updated on Toilets 2024-07-31
5 answers
  1. Anonymous users2024-01-24

    If there is no carport below, the two roads will be directly put into the sewage tank, and the material will not exceed 600 yuan at most, plus 600 yuan in labor costs. If there is a carport below, add another 100 yuan.

  2. Anonymous users2024-01-23

    The situation of my house is the same as yours, but I am on the 7th floor of the top floor, and my toilet and laundry room are all replaced with PVC pipes (the original iron pipes are no longer used), so as not to be confused with the downstairs. The whole contractor is 5,000 yuan (the price is mainly for high-altitude work).

  3. Anonymous users2024-01-22

    I don't know where you are, I'm in Tanggu, these two days have asked several to change the water and water, our house is the 2nd floor, all said to replace at least more than 2,000, is hesitant to change it, but if you live on the 1st floor, it is very easy to do, it should be much cheaper, if the 2nd floor is above the more expensive.

  4. Anonymous users2024-01-21

    It's best to talk upstairs and downstairs about it, and change it together It's easy to do things, if you change it alone, it's not suitable, and there are a lot of inconveniences in saying that the money is not what you should come out of, and only if you change it can you do it well.

  5. Anonymous users2024-01-20

    Can't be replaced, how to connect PVC and iron? The glue can't stand, you can't use it comfortably, the downstairs leaks in a ruckus, and you have to go downstairs to construct the water again, and it's a problem if he asks you to do it

Related questions
19 answers2024-07-31

Dear drops, it's okay, I hope mine can help you.

Can it be replaced separately? >>>More

2 answers2024-07-31

Lilei Network believes that first of all, you must be able to find the company's information, if you can't find his information, then it must be fake; >>>More

3 answers2024-07-31

With what connection? First of all, remove the sludge and rust on the inner wall of the sewer iron pipe and wipe it dry, wrap the PVC pipe layer by layer with raw tape (the raw tape will expand when exposed to water), wrap it around until it will be able to be inserted into the sewer iron pipe, and then evenly coat the raw tape with sealant and insert it tightly into the sewer iron pipe, and finally seal the butt with sealant. The smell is the problem of the anti-water return device.

3 answers2024-07-31

You have just been 30 years, our family's old house was built in 1955, and it is also blocked every once in a while, and often spends money to call people to dredge, usually hit it right (use it carefully), and often flush the sewer with caustic soda

1 answers2024-07-31

It is often clogged or the water is not smooth, and there are generally sediment deposits or cemented feces in S-bends or corners. The sediment should be cleaned or replaced with PVC. I hope my answer can help you.