-
Anonymous users2024-01-24I don't know how far you have been decorated If you haven't tiled the original water pipe into the wall The same is true for the shower If you have finished tiling, then there is no good way to do it Don't be afraid of trouble You can remove the wall tiles and re-run the pipe.
-
Anonymous users2024-01-23Buy two light to dark joints, and it will cost 20 yuan.
-
Anonymous users2024-01-22It is recommended that you go to the building materials store and change to a shower that works properly. In addition, in general, branded showers are free to install.
-
Anonymous users2024-01-21Can I send it to the scene?
The water pipe of the shower must be pre-buried.
The showers purchased are surface-mounted. >>>More
The size of the hot and cold water pipe of the shower faucet is medium to medium 15 cm, and there is also a two-cm adjustment during installation, and you can install it as long as there are 14 to 16 cm in the reserved port.
Yes, you can buy a shower room, it is recommended to buy an aluminum frame, so that you can open a gap in the aluminum position of the wall so that the water pipe can be worn into the shower room, if you don't want aluminum, you can only open a gap in the glass, you can do it, and you have to buy a faucet with an open pipe to install the shower room.
1. Check the spout.
The ordinary spout is plastic, without any elasticity, easy to block, the texture is also very poor, it is more troublesome to clean, and the better spout is generally made of high-quality silicone material, the elasticity is very good, the outlet hole will automatically expand and clean when the water is out, which is very convenient and not easy to block. >>>More
There is a red and blue plastic piece attached to the handle, indicating hot and cold water, pry it open, expose a hole, use a Phillips screwdriver to twist the screw counterclockwise, twist the handle, after the handle is removed, the valve core will be exposed, turn off the main water valve, and replace the valve core.