Will it take two days to sit on the toilet that has just been installed?

1. It all depends on how it is installed, if it is installed with glass glue, it must wait for the glue to solidify before it can be used, otherwise it will not leak tightly. It's about two days to cure. So it takes two days to sit If it's an installation screw, it's ready to use after installation.

The principle of the flush toilet is mainly the siphon principle, and the structure diagram of the flush toilet is also based on the siphon principle. The "pumping" of the flush toilet refers to the S-shaped bend under the toilet, and when the water surface in the toilet exceeds the high point of the S-bend, the siphon phenomenon is formed, which can pump the water and dirt of the toilet together. Until only a small amount of water remains, the siphon destroys, leaving a small amount of water, forming a water seal. >>>More

It depends on what kind of paint it is.

Generally speaking, in terms of safety, water-based paint is the best - in fact, nitro paint - followed by PU paint, followed by PE paint. >>>More

First of all, it should be clear that as a dog's nature, he is reluctant to be near his own nest. At the same time, the dog will find a place that is often convenient through the sense of smell and fix it. Therefore, as he grows older and his range of activities expands, he will gradually find a relatively fixed place away from his nest. >>>More

The drain of the toilet should not be properly aligned with the sewer pipe of the bathroom, and if it is leaking, mind to deal with it immediately, or it will leak underneath.