The pressure of the domestic water tank above the bathroom at home is too small, if you add a booste

Updated on Bathroom 2024-07-07
2 answers
  1. Anonymous users2024-01-24

    Completely agree with this plan, now there are this kind of home pressurized pumps sold in the decoration market, you only need to turn on the faucet The pump will work automatically, and the faucet will stop working when you turn it off. However, in order to prevent leakage from hurting people, the circuit should be installed; 1. Leakage protection switch, 2. The pump socket should be equipped with a switch, and it is best to close it when it is not used for a long time. Remember!

  2. Anonymous users2024-01-23

    It is a very annoying thing that the pressure of tap water at home is not high, and it is inconvenient to wash things and connect them with water, so what should I do? If the entire water pressure is not large, it is necessary to use a high-power fully automatic self-priming booster pump to pressurize the entire household water flow.

    If there is no pressure on hot water, you can only pressurize hot water, such as a water heater or solar energy installed at home, as long as the booster pump is installed in the water heater or solar inlet, first through pressurization and then connected to the water heater and solar energy, so that the hot water can be pressurized. If you have more questions, you can click on ID to consult.

Related questions
The two-meter-high domestic water tank in the bathroom, I want to connect a 1-inch water pipe to the
3 answers2024-07-07

Your water tank is too short, the water pressure is not enough, even if you change to a larger effect, it is not obvious, it is best to install a small pressure pump (stainless steel, about 150 yuan), and then open it when you take a bath!

Is the leakage around the domestic water pipe coming out of the bathroom a quality problem? The deve
3 answers2024-07-07

Of course, it is a matter of housing quality.

What the developer said could not be waterproofed, so it is not a quality problem, it is nonsense, open your eyes and talk nonsense. >>>More

As long as there is water on the upper floor of the bathroom, it can drip into my bathroom, probably
4 answers2024-07-07

If this is the case, the upstairs residents must be required to re-treat the waterproof layer of the bathroom, of course, they must smash the floor tiles and the bottom layer of wall tiles before they can do the waterproof layer, and it is best to carry out more than 24 hours of water discharge test after the waterproof layer, and observe that there is still a leakage problem in your home.

The water tank above the ceiling of the bathroom leaked today, and it was not easy to turn off the w
1 answers2024-07-07

There is no reason for the waterproofing layer.

During construction, it is necessary to strictly follow the specific construction process >>>More

What should I do if the water in the water tank above the bathroom is gone, and then it doesn't go i
7 answers2024-07-07

If there is no water ingress, there is a problem with the water supply. See if the float in the tank above is closing the water ingress.