The two meter high domestic water tank in the bathroom, I want to connect a 1 inch water pipe to the

Updated on Bathroom 2024-04-14
3 answers
  1. Anonymous users2024-01-23

    Your water tank is too short, the water pressure is not enough, even if you change to a larger effect, it is not obvious, it is best to install a small pressure pump (stainless steel, about 150 yuan), and then open it when you take a bath!

  2. Anonymous users2024-01-22

    Use a workaround hoop to heat press a 6-minute and one-inch Pvc pipe, don't use a drilled plastic pipe, the diameter is small and the life is short.

  3. Anonymous users2024-01-21

    Do you know how much an inch is? One inch is equal to a centimeter.

Related questions
4 answers2024-04-14

Nowadays, squatting toilets use low-level water tanks, and the delay valve is rarely used. >>>More

5 answers2024-04-14

The size of the curtain is up to you, as big as you want, as long as the four sides can hold the window and protect people's privacy. However, the minimum should be equal to or greater than 5 cm on each side of the window frame, i.e., not less than 5 cm.

1 answers2024-04-14

Answer, this look, it's a bit unsafe, it's not recommended to be so high.

4 answers2024-04-14

But you can, but not beautiful, generally speaking, the bathroom is not suitable for sliding doors, find a plasterer, use bricks to make the wall sealed, and then install the door, and then the height is also high.

5 answers2024-04-14

If there is a wooden board or carpet in the middle that can absorb water to do the connection, it will slowly penetrate up, if the surface is waterproof, then after the water in the bathroom overflows, it will not penetrate into other places, and you can clean it yourself.