-
Anonymous users2024-01-24A UV board is a sheet whose surface is protected by UV treatment. UV is the English abbreviation of Ultraviolet, UV board UV paint is ultraviolet curing paint, also known as light-initiated coating. Ordinary wood boards, calcium silicate boards and other boards through UV paint, and then through the UV light curing machine drying and the formation of stone boards, with bright surface treatment, bright color, strong visual impact, wear resistance, strong chemical resistance, long service life, no discoloration, easy to clean, high cost of mechanical equipment and process technology requirements, is a more ideal board curing treatment process.
The characteristics of this section of the UV plate A: High surface smoothness: the mirror highlight effect is obvious.
B: Paint film plump: the color is plump and attractive.
C: Environmental protection and health: Usually the paint board is not baked, and there is a continuous release of toxic substances (VOC), UV board solves the environmental protection problem of the century.
Not only does it not contain volatile substances such as benzene, but it also cures by ultraviolet light to form a dense curing film and reduce the release of substrate gases. D: No fading:
Through comparative experiments, it is proved that compared with traditional boards, UV veneer has better physical and chemical properties, which ensures that UV panels do not lose color for a long time, and solves the phenomenon of color difference. E: Scratch Resistant:
The high hardness becomes brighter and brighter the more it is grinded, and it is cured at room temperature for a long time without deformation. F: Acid and alkali resistance and corrosion resistance
UV board can resist the corrosion of various acid and alkali disinfectants.
Multi-layer board is also a kind of solid wood, divided into real solid wood, as well as composite solid wood, composite solid wood is a combination of multiple layers of solid wood, than earlier or more common solid wood doors and composite solid wood doors are called solid wood doors. >>>More
Solid wood particle board, in fact, is a board produced by the process of particleboard, which is also a kind of particleboard, which belongs to homogeneous particleboard. The scientific name of homogeneous particleboard is directional structure particleboard, which is a kind of wood-based board with small diameter wood, thinned timber, wood core, bark, branch wood, etc. as raw materials processed by special equipment to grow 40mm, 70mm, width 5mm, 20mm, thick, and a kind of wood-based board after drying, sizing and special equipment will be criss-cross and directional paving of the surface core layer planer, and then a kind of wood-based panel after hot pressing. After the homogeneous particleboard is dried by the advanced single-channel dryer, the expansion coefficient is small, the moisture-proof performance is very good, and the planer implements directional layer by layer pavement, so its internal internal texture is uniform, and it is stronger than the nail holding force, bending resistance and stability of ordinary particleboard and powdered MDF. >>>More
1. The production process is different, and the solid wood multi-layer board is pressed with many layers of wood flakes; Whereas solid wood plywood is a board made of a lot of wood chips pressed. 2. The material difference is that the solid wood board is all solid wood, usually processed from a whole piece of wood, and can also be lengthened and transversely combined through fingers. It has the characteristics of high cost, grade but easy to deform and crack; The composite multi-layer board through the wheel family Bichang is divided into three layers of solid wood composite and multi-layer solid wood composite, of which three layers are composed of solid wood surface layer, buffer cork core board layer, and balanced bottom plate layer, which is closest to the solid wood floor in the foot feeling and solves the spike deformation very well, and is more used in Europe.
MDF is a solid wood crushed after high temperature and high pressure once formed board, so called MDF, generally now used for furniture are MDF, because high-density board is no way to make furniture (MDF nail force is worse than particleboard, if the screw is loosened after screwing, because the strength of MDF is not high, it is difficult to fix again, so it is rarely used to make cabinets), the density is too high, easy to list. Generally, it is used to make flooring and shape materials. >>>More
The production process is different.
Plywood is a three-layer or multi-layer plate-like material made of wood segments that are rotary cut into veneer or cut into thin wood by wood planer, and then glued together with adhesive, usually with an odd number of layers of veneer, and the fiber direction of adjacent layers of veneer is glued perpendicular to each other. Compared with ordinary market plywood, multi-layer plywood has small deformation, high strength, good internal quality (small holes and no delamination after sawing), good flatness, and can produce 5-40mm different thicknesses. >>>More