-
Anonymous users2024-01-24Yes, but it will cause a lot of trouble when installing appliances in this way
If you install electrical appliances first, you will have much less trouble installing the ceiling than the above
If you have already installed it, when the time comes to install the electrical appliances, the board will be removed from the place where the electrical appliances are installed to facilitate the installation.
The kitchen and bathroom should be done with water and electricity first, and the kitchen should first set the location of the sink of the hood and stove, change the hot and cold water pipes to the sink cabinet, and leave a socket on the side of the hood. The bathroom is set the position of the water heater wash basin, the water heater power supply and the power supply of the ceiling bath bomb lamp. After doing a good job in the hydropower project, the bricks are paved in the waterproof, the ceiling is fixed after the tiles are paved, and the size of the cabinet is measured. >>>More
Kitchen decoration, first of all, the ceiling is located at the top of the room, after the installation of the ceiling will not affect other work, and then the second step is to install the cabinet, after the installation of the cabinet, you can determine where the range hood is placed in the appropriate position, and the cabinet should be customized earlier, because the cabinet customization time will be longer. After the cabinet is installed, it is a matter of buying a range hood and installing a range hood.
Kitchen decoration, first of all, the ceiling is located at the top of the room, after the installation of the ceiling will not affect other work, and then the second step is to install the cabinet, after the installation of the cabinet, you can determine where the range hood is placed in the appropriate position, and the cabinet should be customized earlier, because the cabinet customization time will be longer. After the cabinet is installed, it is a matter of buying a range hood and installing a range hood.
Integrated ceilings and so on are generally embedded into the hungry directly gypsum board holes with keel can be broken if it is a ceiling lamp on the keel or can not find the keel open a small hole plus body forging keel on the screws.
Ceiling first! Rear mounted doors. But it doesn't seem to be related. There is a connection between a door and a business! I don't seem to be able to match the top....