-
Anonymous users2024-01-24This can also be done, but it will be quite troublesome, and it will be very high, and the materials will increase a lot.
It is not easy to fix the wooden keel with an air gun, because the air gun cannot penetrate the iron frame, so the frame must be fixed with a steel plate gun, because the steel plate nails can penetrate the iron frame
You'll get the rest of the story.
It's the rust spot after brushing the latex paint! Buckle the rust spots, and then use white cement or grout to mix with water, make up, and then brush the latex paint when it is dry.
The ceiling is made of gypsum board and keel, generally with wood keel and light steel keel. If you use wooden boards to make a suspended ceiling, because the wooden board is easy to deform, it will also cause the unevenness of the top surface, and it will be easy to change color after brushing latex paint on the wooden board. >>>More
Material BAI fittings.
1. The light steel skeleton is divided into two types: U-shaped skeleton and T-shaped skeleton, and is divided into upper and lower persons according to the load. >>>More
Instead of hanging on the roof with bars, the ceiling rests on the surrounding wall through a small beam, right? >>>More
AIA's gypsumboard ceiling is made of very light material, which can make a lot of good-looking patterns, and it will not be so troublesome during construction.