Furniture paint room, what is going on with the fog back up when spraying paint

If it is a spray topcoat, you can use A4 white paper to file it in a place with paint fog, that is, rub it, where there is paint fog, you can rub it, if the paper becomes soft, change it, so that it will not damage the surface of the paint surface, and the paint mist can be knocked off, I hope it can help you.

If there is a backwater situation when the household uses the sewer by itself, then it means that the drainage pipe is blocked, and the pipe can be dredged through dredging agent or dredging machine, or more serious, you need to contact professional workers to repair and deal with it. 2. If there is a backwater situation when the residents are not using the sewer, then it is likely that the main drainage pipe of the building is blocked, and this situation requires a high-pressure water truck to impact the sewer pipe, remove the dirt on the pipe wall and dredge the sewer pipe through water pressure.

Adsorption, filtration, burning, high temperature catalysis!

1.The bottom sanding is not good.

2.The coating film is too poor. >>>More

Furniture painting should pay attention to the following aspects: 1. The color should be uniform, without a clear color; 2. Spray to a full and uniform flow, not lower than the flow rate of spray leakage spray, oil, orange peel, blisters, whitening and other undesirable phenomena that cannot appear;