How to buy Wansong solid wood flooring

The choice of solid wood flooring is very important, and if the quality is good, it is not only durable, and the appearance is more beautiful. The following is an introduction to the tips for choosing solid wood flooring! First, look at the hardness of the floor to determine its hardness by specific gravity.

The harder it is, of course, the more wear-resistant. Generally speaking, the darker the color of mountain socks, the higher their hardness. Second, look at the appearance of the surface is good and uniform, the color is consistent and there are few tree tumors (eyes) is better.

3. Look at the moisture content When choosing solid wood flooring, pay attention to the moisture content should not be too high, generally below 13.

1. Floor specifications.

In terms of the stability of the plank, the smaller the size of the floor, the better the resistance to deformation, so it is necessary to choose a solid wood floor with a short ridge and a narrow ridge to minimize the bending, twisting, scooping, shrinking, arching and other phenomena of the solid wood floor. Flooring experts believe that the short one is better than the long one; The narrow one is better than the wide, and it is cheap. But now the market is popular wide board, the wide board is more beautiful than the narrow board, generous, the pattern is relaxed, the pattern is complete, but the qualified wide board must go through strict material selection and quality acceptance.

In general, wide floors should have deformation-resistant grooves on the back, and the grooves should be up to one-third of the thickness of the floor. If it is used for floor heating, it should be thin but not thick, generally 8-12mm thick.

2. Floor moisture content.

The moisture content of wooden floors is crucial. The moisture content of the purchased flooring must be equal to the local equilibrium moisture content. When buying a floor, be sure to measure the moisture content, if you don't have a moisture content tester, don't buy its board.

The method of balancing the moisture content determination is very simple, first determine the moisture content of the purchased varieties in the exhibition hall, and then open the box to test the moisture content of the purchased varieties of wood flooring, if the moisture content of the two is only +1%--2%, it is a qualified product.

3. Floor material.

Observe with your eyes whether the floor is of the same material, and whether the board surface has material defects such as cracking, decay, peeling, dead joints, insect eyes, and blue staining. Usually there is no need to be too strict about color differences, joints, textures, etc., which are the natural properties of wood. It is the color difference and the natural texture that changes that show the natural color of the solid wood floor, which is the fashion pursued by the current international home decoration.

4. Machining accuracy.

Generally, after unpacking the wooden floor, you can take out about 10 pieces of freehand assembly, touch it by hand, see whether its processing quality accuracy, finish, whether it is smooth and smooth, and whether the tenon and groove fit, installation gap, denaturation resistance groove and other assemblies are tightly fitted. Observe the tongue and groove occlusion, assembly gap, and height difference between adjacent plates.

5. Floor after-sales.

There are many manufacturers of wood flooring on the market, the quality is uneven, it is recommended to choose a good brand of wood flooring, these brand manufacturers will provide perfect after-sales service, and there is a certain warranty period. It can save a lot of worry.