If you buy solid wood geothermal flooring, how to choose?

If you choose solid wood geothermal flooring, you should choose a strong brand if you don't return to the circle, because solid wood geothermal flooring has high requirements for production technology.

The higher the thermal conductivity, the better the thermal conductivity, and the higher the ratio of thermal efficiency. That is to say, filial piety says that the choice of high thermal conductivity is selected. I hope my answer can help you.

1: Decide on the color and price point.

There are many colors of solid wood flooring on the market, and wood flooring of the same color can also be made of different varieties of wood, and the price varies greatly. Therefore, we should choose our favorite tree species, texture, and color according to our own economic situation, and choose the natural color plate as much as possible when purchasing, not the color board. Try to choose a tree species with a more stable wood material, not because of the color.

Price and other factors to choose materials that are not commonly used to avoid cracking, arching, deformation and other phenomena in the process of long-term use. At the same time, because the floor in the interior decoration can best reflect the owner's decoration style and set off the atmosphere, so be sure to install the decoration style to choose the right floor color, light floor is suitable for modern minimalist style, dark floor is suitable for traditional classical style, in short, the color of solid wood floor should be coordinated with the overall style of the home.

2: Select the size specification.

In fact, the wood floor should be short and not long, narrow and not wide, try to choose the standard board, the length of 450 mm - 910 mm, the width of 90 mm - 125 mm, the thickness of 18 mm, the smaller the size, the stronger the anti-deformation ability. Wide plates on the contrary. If you buy a wide board, you should check whether there is an anti-deformation groove on the back of the wide floor, and the depth of the groove should be more than one-third of the thickness of the floor.

If it is used for floor heating, it should be thin but not thick, generally 8 mm-15 mm.

Take out about 6-10 pieces of flooring and simulate paving on the flat ground, touch it with your hands, see the processing quality and precision, whether the finish is smooth, whether the tenon and groove bite are appropriate, and whether the installation gap and anti-deformation groove are tightly assembled, and whether there is an obvious height difference when you touch it.

3: Check the moisture content and the paint surface.

The moisture content of solid wood flooring is crucial, the moisture content of the purchase floor must be consistent with the local moisture content balance, the moisture content must be detected when buying the floor, the method of determining the equilibrium moisture content is very simple, first determine the sample moisture content of the selected goods, and then unpack the test of the moisture content of the purchased wood floor, the normal error is 1%-2%. Generally, the moisture content of wood flooring is 8%-13%, and the southern region should be within 14%.

Observe whether the surface layer is painted with a high-quality solid wood floor should have a more natural tone, clear wood grain, whether the choice of wood floor is glossy paint or matte paint, the selection should observe whether the paint film on the paint surface is uniform, plump, smooth, whether there is leakage of paint, bubbling, holes, especially the degree of wear resistance.