The toilet bowl has been holed, and what material is used to bet on how to waterproof

Updated on Toilet 2024-07-11
1 answers
  1. Anonymous users2024-01-24

    It can be directly blocked with cement, or you can choose to cover it with glass of the same size, and then glue it with glass.

Related questions
1 answers2024-07-11

This should be based on the design style, and the modern one is made of glass and gypsum board. The Chinese style is carved with solid wood. It can also be modeled with plates, and if you need lighting, use insulating glass aluminum alloy frames; If there is no need for lighting: light steel keel paper gypsum board. >>>More

3 answers2024-07-11

Large ashtray of square ceramic or glass filled with wood chips.

1 answers2024-07-11

Under the staircase, the broken bridge aluminum material is used to make the kitchen wall and roof more transparent. Because the surroundings are covered with double glazing. The closure is relatively tight. The lighting is better.

3 answers2024-07-11

1. Slight blockage of the toilet: Generally, the toilet blockage is caused by toilet paper or sanitary napkins, towel rags, etc., which can be dredged directly by using a pipe dredging machine or simple dredging tools. >>>More

4 answers2024-07-11

The bathroom is waterproof and leakage, and the surrounding walls need to ensure that the height of the painting is not less than 30 cm; If there is a shower, the height of the waterproof paint applied on the installation of the shower faucet and the adjacent wall should not be less than 150 cm, preferably about 180 cm. After the waterproofing is done, a closed water test should be done. It is to put the water on the floor of the bathroom, so that the ground is completely submerged in water about 3 4 cm, and set a fixed elevation (horizontal plane); After 24 hours, if the water level is below the set elevation, it means that there is a water seepage problem on the ground, that is, the waterproofing is not done well. >>>More