-
Anonymous users2024-01-24It may be that the toilet button is rusty and aging, causing the water not to go down.
It may also be a problem on the side of the float, readjust it and try it.
If it's blocked, just use a toilet suction to pass it.
What should I do if I can't get down the water after the toilet is finished?It's a clogged toilet drain, the best and easiest way is... >>>More
It's blocked!!
Make sure that there is enough water in the bucket to cover the rubber suction cups, and then pump the pump handle up and down. If there is not enough water in the bucket, do not flush it, as flushing a clogged toilet will only cause the water in the bucket to overflow. You should use a pan or jar to draw water from another water source, over the suction cups of the hand-pressed bowl pump. >>>More
If it is a toilet that has been used for a short time, the water must be clean, but if the toilet is used for a long time, because the dirt is accumulated on the pipe wall in the toilet, the water will still be a little dirty after flushing, it is recommended that you find a professional pipe dredging personnel to use special machinery to dredge it.
The button on it didn't pop back, just a few taps of the button.