Can you install an electric toilet in the bathroom without dry and wet separation?

Updated on Bathroom 2024-07-11
7 answers
  1. Anonymous users2024-01-24

    I have been doing water and electricity for many years, there is no dry and wet separation of the bathroom, I do not recommend installing sockets, in addition to the problem in the later stage, I can't bear it!

  2. Anonymous users2024-01-23

    It is recommended not to install sockets, after taking a bath, the moisture can not go out for half a day, even with a protective cover is also dangerous, outdoor installation of a protective cover can be used, outdoor and indoor air circulation is not the same as dry fast.

  3. Anonymous users2024-01-22

    OK.

    Here is an introduction to Deheaton's smart toilet, which can be waterproof 360.

    As long as the plug is protected, there will be no problem.

  4. Anonymous users2024-01-21

    Nowadays, many old-style toilets do not do dry and wet separation, which makes it more distressing to install smart toilet covers in the middle and later stages. Many customers don't know whether the wet area can be equipped with a smart toilet seat without distinguishing between toilets, so let's introduce it to us today.

    Can a smart toilet seat be installed in a toilet without distinguishing between wet areas? Although many intelligent toilet seats are waterproof, if there is too much water, some situations will still occur, which will undoubtedly reduce the service life. If there are water droplets everywhere after taking a shower, it is best to wipe them off.

    It is best to do a dry and wet separation at home, and the benefit of the wet area system liquid cherry partition is that it is not delayed to pee in the bath, and it is not easy to get all the bathrooms full of water after the bath. If you are not planning to renovate the bathroom, it is highly recommended that you install a bathroom shower curtain to separate dry and wet, which is also a more convenient and fast way.

  5. Anonymous users2024-01-20

    Although many smart toilet seats are waterproof, if there is too much water, there will still be some problems, which will definitely shorten the life of the draft. If there are droplets of water everywhere after taking a bath, it is best to wipe them off. It is best to do a dry and wet separation at home, the advantage of dry and wet partitioning is that the old toilet is not wrong with the bath, and the whole bathroom will not be filled with water everywhere after bathing.

    If you are not careful about Zheng Xiao's bathroom renovation, it is recommended that you can install a shower curtain to achieve dry and wet separation, which is a more convenient method.

  6. Anonymous users2024-01-19

    Please cherish your opportunity to play, work hard for the happiness of the Hezen family, fight for the wonderful future, and applaud your choice! Remember the persistence that keeps you grounded!

  7. Anonymous users2024-01-18

    This is something to consider. Because smart toilets can't be diving. Smart toilets are generally not affected by the separation of dry and wet.

Related questions
2 answers2024-07-11

1. The dry area is designed outside the bathroom.

Dry area design is a completely separated design scheme outside the bathroom, this practice is usually to put the bathing area and the toilet all in the bathroom, the outside is used as a washbasin, and the middle is directly separated by a door, this scheme is the most thorough and effective, the separate handwashing station area avoids the conflict between the toilet and washing, for the family with more residents, it is very practical, in addition, this design is also very suitable for small apartment types, many owners will think that their bathroom area is too small, there is no way to achieve dry and wet separation, By placing the sink outside the bathroom, you can easily achieve the effect of separating wet and dry. >>>More

2 answers2024-07-11

Shower curtains can be hung between shower pools. Ground waterproofing strips can be made 3 4-5 6 under the curtain.

7 answers2024-07-11

1. The dry area is designed outside the bathroom.

Dry area design is a completely separated design scheme outside the bathroom, this practice is usually to put the bathing area and the toilet all in the bathroom, the outside is used as a washbasin, and the middle is directly separated by a door, this scheme is the most thorough and effective, the separate handwashing station area avoids the conflict between the toilet and washing, for the family with more residents, it is very practical, in addition, this design is also very suitable for small apartment types, many owners will think that their bathroom area is too small, there is no way to achieve dry and wet separation, By placing the sink outside the bathroom, you can easily achieve the effect of separating wet and dry. >>>More

1 answers2024-07-11

Try not to install a floor washbasin.

The bottom of the washbasin is easy to leave water stains, which can breed bacteria and are not easy to clean. >>>More

1 answers2024-07-11

A washbasin drain and a bath shower drain are enough.