How to remove lead traces from the glazed toilet bowl

Updated on Toilet 2024-07-11
4 answers
  1. Anonymous users2024-01-24

    If it's a scratch on the bottom of the toilet bowl with stagnant water, definitely use Blue Moon's toilet cleaner! It's not advertising. I experienced that the toilet was blocked and dredged with a metal wire tool, but the toilet was opened, and the porcelain surface at the bottom of the stagnant water was black scratches, which was very ugly.

    I used various disinfectants and toilet cleaning liquids to rinse, and I also tried to brush with a small brush, but it didn't work. I don't dare to use a large brush, for fear of making deeper and more scratches. As a result, the 1 yuan blue moon bought by the activity, poured it into the toilet for an afternoon, and all the traces at the bottom of the stagnant water disappeared.

    Other toilet cleaners are mainly washed and flushed directly, which may not reach the time so it has no effect. This blue moon's toilet cleaning liquid was bought for 1 yuan at the time, and I didn't feel distressed when I poured more, and the effect was unexpected! It's just that the taste is not good compared to other brands, ......

  2. Anonymous users2024-01-23

    If it is in the glaze, it can not be wiped down, you can only find the manufacturer to replace, if it is on the surface, you can try it with toothpaste, it is not recommended to use hard objects to polish, it will affect the glaze layer on the surface.

  3. Anonymous users2024-01-22

    Go buy porcelain polish, sprinkle it first and soak it, and then wash it.

  4. Anonymous users2024-01-21

    Try it with an eraser that erases pencil words.

Related questions
2 answers2024-07-11

There are two situations when the glaze of the toilet is off, first, the toilet is completely broken. Second, the toilet is a defective product, that is, repaired porcelain, and the normal toilet is dried outside the house for thousands of years, and it does not fade or lose the glaze.

6 answers2024-07-11

It can be cleaned up as follows:

Detergent descaling: Put an appropriate amount of water in the toilet bowl first, clean it with a toilet brush, then pour in 5-10 ml of detergent or hydrochloric acid solution, apply it evenly with a brush and then scrub it. If the dirt is heavy, you can pour a little more detergent to soak and brush until it is clean. >>>More

3 answers2024-07-11

Cool oil deodorizes. Open the lid of a box of cooling oil and place it in a low place in the corner of the bathroom to remove the odor. And a box of cool oil can be used for 2-3 months, which is economical and practical. >>>More

6 answers2024-07-11

Buy some decontamination powder, don't use water, use a rag or something, get some decontamination powder to hold down the rusty place, dry it, after it is basically clean, you can also use white toothpaste to rub it again, and finally wash it with water! Bathtubs like acrylic have dirt, scratches, and can also be rubbed with toothpaste. It is also possible to remove odors, pour cola or other carbonated drinks into the toilet, and then use a toilet brush to scrub the toilet. >>>More

1 answers2024-07-11

There is no way to repair the traces left by cleaning the toilet bowl with aluminum wire, remember the lesson of this time, and don't use aluminum wire to clean the toilet bowl in the future.