How to adjust the furniture wood thermometer to the high side

Updated on furniture 2024-07-19
1 answers
  1. Anonymous users2024-01-24

    My family used to run a lumber yard. It seems that the steam drying room is used, but I forgot if there is no humidity control function. There should be. The temperature is rising from 40 degrees until about 100 degrees.

Related questions
1 answers2024-07-19

It's already poured into the toilet, forget it, it doesn't matter.

2 answers2024-07-19

Turn off all heating devices in the room and open windows for ventilation. Then wear gloves, use a small shovel to collect the mercury and bury it deeply, or sprinkle some sulfur powder on it, sulfur and mercury reaction can produce mercury sulfide that is not easily soluble in water, and the harm will be greatly reduced. Since mercury can evaporate into a gaseous state at room temperature, it can easily be inhaled into the respiratory tract and cause poisoning, so it is best to wear a mask when handling mercury scattered on the ground.

3 answers2024-07-19

There is a sensor on the smart toilet seat that adjusts according to its own temperature, so you don't have to worry about getting burned.

3 answers2024-07-19

Let me keep it simple. If you want to adjust the furniture and the door is still using a dark hinge, then there is an adjusting screw on the hinge arm (the one near the hinge cup), this is to adjust the "left and right" margin, adjust the amount of door panel coverage. If alignment is required in the height direction, the base of the hinge can be adjusted. >>>More

2 answers2024-07-19

It is recommended that the color essence be added to the topcoat, so that the color is more uniform after coloring, and it can also be added to the primer, which will increase the difficulty of construction when the primer is polished, and the color will be knocked off if the paint film is worn through. Later color correction is very troublesome.