How to deal with leakage in the bathroom floor tiles

1. How to deal with the leakage of the bathroom floor tiles:

If there is a problem with the waterproof layer, the tiles must be removed, the wall must be beaten to the waterproof layer, and it is better to see the inner wall, and then scrape the putty again, re-make the waterproof layer for the wall, and then pave the tiles, which is generally more complicated.

The second is that the water pipe rupture leads to water seepage, in this case, the water pipe needs to be tested to see if there is a water leakage, if it is indeed caused by the water pipe damage, to find out the leakage immediately, open the wall and replace the water pipe.

If the wall is only leaking because of moisture, you only need to pay more attention to the ventilation and cleaning of the bathroom in your daily life.

If the tile gap is not good, there is water seepage. First of all, you need to use cement or caulk to fill the cracks, and then make a layer of waterproofing.

Bathroom waterproofing should use flexible waterproof coating (K11 waterproof slurry, JS waterproof coating), this coating has a certain elasticity and will not cause cracks due to the thermal expansion and contraction of the building; Water-proof materials should not be used for large-area waterproofing.

Second, the cause of water seepage in the bathroom floor tile.

Bathroom tile water seepage must first understand what causes water seepage, there are several reasons: first, waterproof is not in place; secondly, the water pipe is damaged; There is also a humid air guide in the rainy season; Finally, the gap in the tile is not filled well, and water seepage.

Third, the laying of bathroom tiles.

1. Dry paste method.

The use of tile adhesive pavement is also called dry pasting, which changes the wet practice of mortar cement, and the tile does not need to be soaked in water in advance, and the base surface does not need to be wet. As long as the basic conditions of the pavement are good, the operation condition can be greatly improved. Its bonding effect also exceeds that of traditional mortar cement, especially suitable for small and medium-sized projects and home decoration with a small working surface and an unsatisfactory working environment.

2. Colorful caulk.

It is generally used for the floor or wall surface of the jointed pavement. It is characterized by strong color fixation, pressure resistance, wear resistance, no alkalization, no shrinkage, no chalking, not only to change the tile gap is easy to fall off and not firmly adhered to the problem, but also to make the color of the gap and the tile match appear unified and harmonious complement each other.

3. Combined pavement of various specifications.

Choose a variety of floor tiles with different geometric sizes and sizes to pave in groups according to a certain combination. Because the floor tiles are combined by different sizes, and there are many combinations, the geometric lines of the ground change immediately, reflecting the change and vividness in the order.

I don't know if the water leak you are talking about is leaking to the people downstairs of your house, if so, then you have to do the waterproofing again, it should be that the waterproof layer has been destroyed.

If the floor tiles are bubbling with water, it may be that the water inlet pipe is broken, or the bathing water is flowing from the cracks in the wall tiles to the floor tiles and then coming out. In this way, you can hollow out the gap and do caulking and sewing.

Causes and solutions of water seepage in bathroom floor tiles.

First, the waterproofing is not in place;

Solution: If there is a water seepage problem in the waterproof layer, the tiles must be removed, hit the waterproof layer to see the inner wall, and then scrape the putty again, re-make the waterproof layer for the wall, and then pave the tiles.

The construction process is as follows:

1. Dig up the bathroom to the floor;

2. Clean up the base layer and carry out the waterproof treatment of the base layer;

3. Carry out waterproof additional layer construction around the pipeline, yin and yang corners and other places that are prone to water leakage;

4. For the construction of the first waterproof coating, JS composite waterproof coating is recommended for urban engineering waterproofing, which is environmentally friendly and has good waterproof performance;

5. Carry out the construction of the second waterproof coating;

6. Conduct a closed water test for 24-48 hours;

7. After there is no leakage, the restoration work of the toilet can be carried out, including the process of pasting porcelain tiles.

2. Caused by damage to water pipes;

Solution: When inspecting, you need to conduct a pressure test on the water pipe to see if there is any water leakage, if it is indeed caused by the damage of the water pipe, you should immediately find out the leakage, open the wall and replace the water pipe.

3. The air is humid in the rainy season;

Solution: Water seepage on the wall caused by dampness, so you only need to pay more attention to the ventilation and cleaning of the bathroom in your daily life.

Fourth, the tile gap is not filled well, and water seepage.

Solution: First you need to use cement or caulk to fix the cracks, and then make a layer of waterproofing.

The effect of using invisible waterproof liquid to treat the water seepage of tile joints is good, which can only be for wall tile joints. If it is a ground tile joint seepage, the combination of invisible waterproofing liquid and good waterproof grout can only solve the temporary water seepage problem. The key to water seepage should be that your bathroom is not waterproofed well.

Hello, please describe the problem in detail.