What to do if the thin pipe of the toilet is leaking?

Updated on Toilet 2024-07-14
4 answers
  1. Anonymous users2024-01-24

    Leaking water at the connection between the toilet bowl and the sewer pipe: If there is a leak at the connection between the toilet bowl and the sewer pipe, you will need to reinstall the toilet bowl and reseal it.

    The common cause of toilet leakage is that the hemispherical rubber cover that seals the drain is lighter, and the water leaks after the water tank is leaked due to insufficient gravity and not tight enough when it falls, and it often needs to be repeated repeatedly to close the lid tightly. The solution is to bundle a small amount of heavy objects on the connecting rod connecting the rubber cover, such as large nuts, toothpaste skins, etc., and pay attention to the bundle as close as possible to the rubber cover, so that the rubber cover is easier to cover the drain, and the water leakage problem will be dealt with.

    Qualified households should change to water-saving sanitary appliances, advocate the use of water-saving water appliances or sanitary ware, use ceramic chip sealed faucets, eliminate spiral lifting iron faucets, transform toilet tanks of more than 9 liters, and use toilet water tanks of no more than 6 liters. For existing non-water-saving toilets, try placing a brick or a salt water bottle in the tank to reduce the amount of flushing water.

  2. Anonymous users2024-01-23

    I laughed, no effect? Then your water pipes will be unplugged directly? This is the water supply pipe of the toilet, that is, after each flush, due to the siphon, the water seal may not get the required height after drainage, so a water supply pipe is added, the water supply pipe is to ensure the water seal, so as to ensure the function of the toilet and the ability to isolate odor, the position you connect is right, if you have been running water, it should be due to the water parts used for too long, there is a problem with the function, you might as well remove it and rinse it, and move the activity, but do not adjust the configuration above.

    If it doesn't work, just change it, this thing is not very expensive.

  3. Anonymous users2024-01-22

    This pipe leakage has no effect, rest assured to use it, you can also pull out this thin tube and put it on the side to watch the water discharge, the water tank will stop when it is full,

  4. Anonymous users2024-01-21

    It's okay if this tube leaks.。。 Feel relieved.

Related questions
3 answers2024-07-14

Just find a plumber to change a set of tank accessories, ask here, you won't understand.

15 answers2024-07-14

How to deal with a leaky toilet:

1.Check if the flush switch is reset. The plastic flush switch of some flush toilets will occasionally get stuck after being worn for a long time and cannot be restored. Generally, the switch can be reset by repeating it several times. >>>More

1 answers2024-07-14

Ceramic can only be replaced with an entire toilet.

The plastic water tank can be temporarily glued with AB, and the water tank has to be replaced for a long time. >>>More

1 answers2024-07-14

Dig the best permeable waterproofing can be done by yourself. >>>More

1 answers2024-07-14

Is it the bottom of the toilet?Put the water clean, clean it up, dry it, and then paste it again with clear glass glue, and it will generally not leak again.