If the toilet is broken, there will be repairs, not only if the valve is opened, the water will be t

If there is water running in the toilet, it is almost certain that the rubber cover for draining water is loose. That thing is at the very bottom of the toilet tank, and it is very difficult to break, but due to the long period of use, the rope (or adjustment iron bar) that hangs it has changed, causing the rubber cover to loosen and cause water leakage. The solution is to make the rope a little longer so that the lid fits into the spout and does not leak.

Pay attention to the adjustment to look at the two buttons on the top of the toilet tank, one is half water and the other is full water, if it is too long, then the water can not be released, or the half water button loses its effect, and the effect of half water is half water.

Maybe the tank is old and broken.

1. Maybe the limiter is broken, but the buoyancy switch seems to be. You turn on the water tank and see if there's something tied to it, or the length of the rope has changed.

2. The water outlet in the water tank is not well sealed.

Solution, if the rope changes, adjust the length of the rope, make the sealing ring of the sealing mouth whole, or change the sealing ring.

That's when the drain of your toilet is broken. I can't stop the water. Just change the set.

If it is a split toilet, take down the skin that stops the water inside and bring it to the plumbing and electricity with one, if it is a conjoined toilet "pressed on the toilet", you need to change a set of sanitary ware.

When you open the lid of the water tank, you will see the structure inside, one of the water inlets, one of the water outlets, according to your situation, the water outlet has not returned to the position of the close or is not completely covered, it is recommended that you open the activity and try again.

If the sanitary ware is broken, just replace it with a new one.

If you press something, you can't press it.