-
It's because your toilet fitting inlet valve is broken, and you can change it. It's your inlet valve that keeps getting water, and you can't stop the water coming in, so it's your inlet valve float card owner. It costs about 100 yuan to change a set. Expensive $200.
-
Your inlet valve is broken! The water level is too high to seal, so the water will overflow, not a real leak!
-
Pull the white rod on the float of the inlet valve with your hand, which is the rod with a cross, and if you lift it, it can stop the water.
Then I'm going to open the green lid and fix it again, so tell me the results first.
The easiest: spray with pesticides!
You don't have to change the whole thing, the reason for the leakage is that there is a leak in the water tank, and the overall structure of the toilet is very difficult to break So it is whether the water tank has a small valve tightly, that is to say, when you press the flush, the valve will open, and he will close when he does not press it, but after a long time, it will not be closed tightly, generally speaking, it is a small lever One end is a float, who rises up to the float at this end, and the other side falls, and the water outlet is closed, you can take a look. >>>More
It may be that the insulation layer of the exterior wall is damaged, and rainwater seeps into the wall. >>>More
The leakage point is generally around the water pipe, and the inspection mouth Rose cover is loose, and the mat inside the confusing person is broken. Also, if the water pipe joint is loose, feel whether there is water with your hands.
Xiaomi Home Furnishing Pavilion has fixed points in various cities, which you can check on Xiaomi's official website.