-
Anonymous users2024-01-24There is no picture, the question is a bit laborious to understand, guess and answer.
Generally, the balcony design live load (except for the self-weight of the component and the movable load of plastering) is about 200 kg of square meters, and the end can also be about 100 kg of concentrated live load per linear meter. It is calculated that the load of 50 mm light bricks and floors, a 75 kg empty person, windows, etc., will not pose a danger to the balcony on this floor. The key is that "a wall on the load-bearing beam of the balcony", this hand blind load is large, whether it is a cantilever beam or a cantilevered plate balcony, it constitutes an unsafe factor.
There is also the "cover plate that eats on the exterior wall of the ceiling" If it is a concrete balcony roof made later, it may also be problematic.
If you don't go to the scene, you can't learn more and you can't draw conclusions. Considering that balconies are generally cantilevered members, this structural form is very prone to safety accidents. For safety reasons, it is recommended that you ask a professional building structure designer to come to the site to help.
Life is your own, be careful.
The thickness of the tiles is within the range of design and consideration, but the thickness of the floor of the shower room is 29cm.
You have to look for the design drawings to see this, and the load-bearing capacity of balconies of different structures varies greatly. >>>More
No, depending on the specific situation, the prefabricated floor slab is about 250 kg square, and the cast-in-place floor slab is about 400 kg square.
The load-bearing design of the balcony is generally KN per square meter, and the load-bearing capacity of the balcony is about 200 kg per square meter. The ends of the balconies are also allowed to carry 1 kn per square meter, as the ends of the balconies can also carry 100 kg of concentrated load per linear meter. The load-bearing range of the balcony is divided into two kinds, one is the self-esteem of the balcony itself, and then the balcony increases after the change into the middle, the national implementation of the balcony load-bearing design standard is 250 kg per square meter, more than this standard will bring potential safety hazards.
1. The load-bearing range of the balcony is divided into two types: one is the weight of the balcony itself, including the weight of the balcony bottom plate, upper and lower plastering, and railing; The second is the change of load-bearing after the balcony. Since the long cover repentance period, the national implementation of the balcony load-bearing design standards are: >>>More