-
Anonymous users2024-01-24Generally not. Due to the large number of water facilities in the bathroom, the top surface is often made about 20 mm lower than that of other rooms in order to avoid water from flowing out of the living room and damaging the furniture floor. Usually, the bathroom area is not too large, the floor span is generally small, and the reasonable floor design thickness is generally smaller than the floor slab of the living room, living room and other rooms.
Therefore, the bottom surface of the board is flush and the top surface is low, which not only saves material labor, but also prevents water outflow, killing two birds with one stone.
Regardless of whether the top surface is flat or uneven, the bottom elevation is generally the same, which is convenient for construction, and is usually conducive to maintaining the indoor net height.
The floor of the bathroom should be slightly lower so that in case of leakage, it will not flow into other rooms.
No, if the bathroom floor is wet, it is generally because the waterproofing is not done well. I don't know if the bottom plate or the top plate is wet, if you want to know more about waterproofing, you can consult Changsha Jiacheng Waterproof Company, they can provide waterproof consulting services for free.
The adjacent plate of the partition wall is three centimeters lower, the hanging mold is more than 20 centimeters, and the height of the area begins to be calculated, and the height is calculated from the bottom.
Of course, it's good to construct, and now it is required that rooms with water are required, such as bathrooms, balconies, etc., which are 5 cm lower than the interior, how can it not be done! >>>More
The function of the bath bomb is that if the temperature of the bathroom is not cold enough when taking a bath, you can turn on the bath bomb first and then take a bath. The north uses more, and the south uses less, so it is still necessary to procure.