The toilet bowl is loose because the small hole at the bottom needs to be screwed?

Updated on Toilet 2024-07-08
2 answers
  1. Anonymous users2024-01-24

    The toilet is now fixed by glue, not bolted, because the toilet is not subject to any big force, silicone can be used, but when gluing, it is necessary to locate first, mark and then glue, so that the bonding area is as large as possible to ensure that the bonding is firm.

  2. Anonymous users2024-01-23

    Nowadays, toilets don't use screws, and using screws will destroy the waterproofing. Use glass glue to make a circular along the edge, and it will dry in 24 hours and you can use it.

Related questions
1 answers2024-07-08

Hello, even if it doesn't leak, it should be sealed, otherwise it smells. This means that the drain and drain of your toilet are not right, but there is no way to get it, just use glass glue to fill the holes on both sides with glue and seal them.

1 answers2024-07-08

It is the leakage of the sewer in your house, you can wait for the water to run out of water with pure cement to plug the hole.

4 answers2024-07-08

Because the toilet tank is filled with toilet cleaners, the toilet bowl can flush out blue water. >>>More

2 answers2024-07-08

Do other water pipes come out of the water? If you don't get out of the water, you must be in arrears.

2 answers2024-07-08

What is the cause of a clogged toilet?Because the toilet outlet ratio is small (4-5 cm), and the water absorption is not strong enough, it is easy to be clogged once it encounters debris. . . . Debris is coarse and hard stool, too much tissue (or sanitary napkins), and other foreign objects will cause the toilet to be blocked. It should be noted that when defecation, it is necessary to flush two or three more times, and in case of large and hard stool and excessive stool, try to avoid flushing paper and stool at the same time. >>>More