-
Anonymous users2024-01-24The faucet is generally not easy to block, and some connecting hoses are very thin, and they will be blocked by one end of the faucet, so you can check whether the hose is blocked first.
-
Anonymous users2024-01-23You can find a professional to repair it, and the property will do.
-
Anonymous users2024-01-22Is it rusty? You can use vinegar, not peanut oil.
A single cold faucet is connected with only a single stainless steel hose, while a hot and cold water faucet has two stainless steel hoses connected. Then, just buy a kitchen hot and cold water faucet, you can solve the problem of changing a single cold to a hot and cold faucet, without digging a hole in the sink. The most important thing to install a mixer faucet in the kitchen is to lock the faucet firmly to avoid loosening caused by long-term use. >>>More
According to what you said, depending on the water pressure problem, the remaining two reasons are the first two reasons, 1 is that the pipeline leading to the kitchen may be blocked, 2 the cold water angle valve or the mixing valve of the sink has a problem with the cold water diameter or blockage. You can first swap the water inlet pipe and angle valve of the mixing valve (on the outlet of the angle valve or on the faucet water inlet), if the cold water becomes larger and the hot water is smaller, it is the problem between the angle valve and the mixing valve, if it is exactly the same after the change, the water pressure and flow rate from the wall are small.
There are 2 hot and cold water pipes, and the corresponding outlet pipes are also 2, which can be connected to each other.
Step 1: Prepare your tools first: screwdriver, wrench, pliers. >>>More