-
Anonymous users2024-01-23According to what you said, depending on the water pressure problem, the remaining two reasons are the first two reasons, 1 is that the pipeline leading to the kitchen may be blocked, 2 the cold water angle valve or the mixing valve of the sink has a problem with the cold water diameter or blockage. You can first swap the water inlet pipe and angle valve of the mixing valve (on the outlet of the angle valve or on the faucet water inlet), if the cold water becomes larger and the hot water is smaller, it is the problem between the angle valve and the mixing valve, if it is exactly the same after the change, the water pressure and flow rate from the wall are small.
-
Anonymous users2024-01-22In this case, there should be a foreign body blocking the cold water inlet in the faucet, and the faucet must be disassembled to remove the foreign matter.
Method 1: Close the main water valve first, and then put the faucet handle with a red and blue mark of about 8 mm, buckle it down, loosen the fixing screw counterclockwise with a flathead screwdriver, take off the handle, use a live wrench to disassemble the valve core of the faucet, open the upper part of the gland with a wrench, and take out the ceramic valve core inside. >>>More
A single cold faucet is connected with only a single stainless steel hose, while a hot and cold water faucet has two stainless steel hoses connected. Then, just buy a kitchen hot and cold water faucet, you can solve the problem of changing a single cold to a hot and cold faucet, without digging a hole in the sink. The most important thing to install a mixer faucet in the kitchen is to lock the faucet firmly to avoid loosening caused by long-term use. >>>More
There are 2 hot and cold water pipes, and the corresponding outlet pipes are also 2, which can be connected to each other.
Step 1: Prepare your tools first: screwdriver, wrench, pliers. >>>More
Find out if the faucet on the sink is broken. Detecting this is very simple, you unscrew the bolts of the hot and cold water pipes connected under the wash basin (turn off the hot and cold water valves beforehand), check whether it is a pipe problem one by one, if both come out of the water, and the water pressure is sufficient, then it proves that the faucet on the wash basin is broken.