-
Anonymous users2024-01-24Nine ways to maintain lacquer furniture.
Method 1: Try to avoid using glass panes to cover the tabletop. Because it is easy to mold, it is not good for paint or wax decoration.
But we can also put a soft rubber pad under the glass plate. It is important to note that the rubber pad should not always be in a fixed position, and it is not right to think that this will be done once and for all.
Method 2: Collections should also be dustproof. If dust accumulates, it can be gently cleaned with a chicken broom and a soft brush, or wiped with cotton gauze. If the surface of the utensils is stained with dirt, it can be cleaned with detergent or gently wiped with cotton gauze dipped in a little cooking oil.
Method 3: Regarding the storage of lacquer furniture, we should pay attention to moisture-proof, and long-term sealed storage is easy to mold.
Method 4: Use a clean, moist cotton cloth to wipe the surface of the furniture, and never use a dry or wet cloth. The lacquer is waterproof, but it is not completely unafraid of water, and wiping the paint with a cloth that is too dry and hard will leave scratches.
Method 5: It should be noted that the temperature of lacquer furniture should not change sharply when collecting, especially not below zero.
Method 6: Lacquer furniture collection should especially avoid being too dry. It is best to place lacquerware furniture in a glass cover with constant temperature and humidity, and a bowl of water in the glass cover.
Method 7: Lacquer furniture should be collected to avoid sun exposure, sunlight will deform lacquer furniture, overbearing. On the other hand, you should not let hot or cold objects on the lacquered surface of the furniture. Because uneven heat and cold can cause damage to the paint finish.
Method 8: When it comes to the remediation of paint scratches, you can use absorbent cotton dipped in sand wax (light green, available in chemical stores) along the direction of the wood grain with appropriate strength.
Method 9: Move lacquerware furniture with both hands gently, do not collide or rub with hard and sharp objects, and avoid violent vibration. Some lacquerware furniture has been buried in the ground for thousands of years, and the tire becomes loose, and if you are not careful, it will be damaged.
This kind of popular MDF sticker furniture in the early years is most afraid of bumps and disassembly, and the service life is very short, because of its low price, it is mostly used for office and temporary residences that are not exquisite. Now we are paying attention to health and environmental protection, and this kind of thing with high formaldehyde emission should be eliminated a long time ago! >>>More
Upstairs, these are unpopular industries, and the more unpopular the industry, the higher the profits, and the less business volume. >>>More
There is no problem with really polishing in place, but the workers are tired and don't like to do it, and the sealant can be tried in a small area to see if it works, or consult the manufacturer's technology.
If there is a place to fall off, it means that the putty is warped, gently shovel with a thin shovel, you can't, the place that can't be shoveled can be sandpapered, it can also be sanded off, the old paint surface is sanded off, after revealing the original color of the wood, you have to use fine sandpaper to polish it again, and then you can apply the refresh paint, the specific method is like this: >>>More
If you don't worry, you can buy it and put it for a period of time before using it, and buy a brand of furniture that their nails will not exceed the standard.