-
Anonymous users2024-01-24Now they say that there is no taste, if you go to test it yourself, it is also a taste, so it is necessary to purify the indoor traces, and the Lanjie fresh air installed at a friend's house feels very useful.
-
Anonymous users2024-01-23Nowadays, coatings are basically suited, but there are single and double components, and there are also diluents for single components, and you can mix them in proportion; The two-component has an extra hardener, and if it can be used up at one time, you can pour several components into one piece and stir well.
-
Anonymous users2024-01-22Try Dulux Breath Deodorised 5-in-1 Water-Based Wood Paint.
First of all, use putty to fill the gaps and nail holes, and then paint, there are many kinds of paint, some also have a primer topcoat, or directly varnish, I only know these as an amateur.
"1. Use sandpaper from coarse to fine sandpaper to polish the workpiece to obtain a smoother surface 2. Scrape the water-based wood putty on the workpiece in batches to obtain a better feel 3. Carry out bottom coloring treatment on the workpiece to get the desired color 4. The first time the brushing method is used to increase the penetration depth of the wood wax oil, and the construction speed is fast 5. The second time is wiped and painted, which can save the amount 6. After the second or last surface drying (about 1 hour in summer and about 2 hours in winter), it is dried immediately The net cotton cloth wipes the surface of the workpiece, can obtain a smooth effect 7, increase the number of times of wiping, and polish with fine sandpaper one by one, and finally adopt the mode of wiping after the thin wipe surface is dry, and the effect of high-end furniture can be obtained"
Step 1: According to the roughness and hardness of the surface of the wood, select sandpaper of the same type for sanding. Step 2: >>>More
All kinds of furniture paint construction technology - wood paint 1) on the coloring oil or toning oil (note: limited to the project with discoloration requirements, this process is not required for ordinary projects. 2) Brush the varnish protective primer (if there is no one process, i.e., this is the first process) If the varnish is brushed while maintaining the original color, then the surface must be cleaned and the first protective primer must be applied immediately after the material is purchased at the construction site. >>>More
The old paint film must be sanded to increase the adhesion of the new paint film. If the light color covers the dark color, it needs to be sanded a little harder, or directly scrape the putty and then spray paint.