The toilet tank wrench will not bounce up when the wrench presses the flush, and the toilet will lea

Water quality may cause the failure of the water parts, you can take off the water valve, clean it with clean water, and then press it repeatedly, and install it after recovery, but do not move the small scale next to him, otherwise it will affect the function and water volume of the toilet. If you still can't, contact after-sales. Generally, this thing can be guaranteed for three years.

Don't have an automatic water storage function? You open the lid where the flush key is on the toilet and see if there is any water.

See if the toilet outlet is clogged and pass it; Clean the inside of the toilet tank; See if the water level is too low, if it's too low-key and a little higher;

The flush button of the water tank, remove the root mother on the button thread, put the button into the hole, and then lock the removed root and mother, you can do it, two buttons, generally a large button corresponds to a large amount of water.

Your toilet water part is broken, you need to replace a water part normally, I am in the Chaozhou toilet production base, these problems are very simple.