-
Gas water heaters are like this because the water flow on both sides is different. A small way is to adjust the water temperature to the minimum, the gas to be larger, and then use the gas to control the water temperature.
-
If you can't start the fire, it may be that the water flow in the bathroom is too small and the pressure is not enough, you check whether the valve is open to the maximum, and whether the bathroom mixing valve is blocked.
-
Take the shower head off and try it!! Set the temperature of the water heater to a high temperature!! It's the one facing the water heater with the right hand, don't make a mistake!! If it doesn't work, the water diaphragm of the water-gas linkage valve is broken!! Just change it!!
-
It may be that the water pressure in the toilet is too low.
-
It is advisable to check that the toilet water pressure valve may be problematic.
-
The water flow in the bathroom is not enough, either the pipe is blocked or the valve is the problem.
-
It's that the battery is gone, so change it.
The flow rate of the hot water switch in the kitchen did not meet the requirements, and it was opened a little bigger.
The solar water heater is not afraid of the sun, and the water of the solar water heater will not be easy to heat when you hit the cabinet.
This question is very simple and can be understood by sorting out the clues. If you want hot water to come out of the outlet of the hot water in the tank, it means that the water heater is good and there is no problem. The problem is with the hot water pipes. >>>More
The pipeline is blocked, and the water flow cannot meet the basic requirements of the water heater. >>>More
If the kitchen can catch fire but the bathroom can't, it may be that the pipes are blocked, so you can clean the pipes and try to clean them.