-
Anonymous users2024-01-24Install the basin: Assemble the basin parts, adjust the level of the basin, and ensure that there is no water in the basin and at the bottom of the basin. The hose expands and expands with distance, connecting the basin floor to the floor drain securely.
Test and protection: After installation, it is necessary to test the water to ensure that the water is unimpeded. Finding and punching: Use a pencil and a level to determine the drilling position of the aluminum against the wall, and use a percussion drill to punch the hole.
Install the aluminum: Hammer in the rubber particles at the drilled hole and lock the aluminum strip to the wall with screws.
Fixing the glass: Clamp the glass to the hole in the bottom basin and fix it with screws.
Install pipe jacking: find the corresponding position above the fixed glass and drill holes, install (straight and beveled) fixing seats and connect the pipe jacking. It is fixed to the top of the glass with a bent sleeve.
Installation of the shelf: Align the position of the shelf, tighten the nut of the shelf, fix the shelf glass, and keep it vertical and horizontal. Pay attention to waterproofing under the aluminum material that holds the glass in place.
Install the movable door: Install the hardware of the movable door and install the hinge at the reserved hole of the fixed door. After installation, adjust the position of the shaft core of the lotus leaf until the door feels the best.
Do a good job of waterproofing: Install suction strips or water-retaining adhesive strips on the side or under the glass as required. Use silicone to make tight joints between aluminum and the wall, glass and basin.
Debugging and fastening: check whether each part is comfortable and smooth, and adjust it in time if any problems are found. After adjustment, tighten the corresponding screws to make the whole shower room more firm.
Finishing work: Insert the decorative aluminum strip into the wall aluminum to ensure that its appearance is neat and elegant. Finally, wipe the entire shower room clean with a rag.
Nowadays, many people choose to install a shower room at home, separating the sink from the bathing place in the bathroom. So how do you install a shower room? Next, PChouse will introduce to you how to install the shower room. >>>More
8.Fixing the glass (important link): lock the glass clamp at the bottom basin borehole, the bottom of the flat glass or curved glass falls into the glass clamp groove, and slowly push into the aluminum material attached to the wall. Then fix it with screws. >>>More
Think no matter where the shower room is against the wall? As long as there are professional installers, they will have a set of methods, and they can find a way to install successfully, which can be assured.
The first step should be for the installation of the basin. For the installation of the bottom basin, it is true that the waterlessness of the bottom basin is an important point. If there is moisture retained, it will have a great impact on the installation. >>>More
To see what type of installation you can find a professional company to be responsible for, you have to look at the instructions for your own installation, and each shower room manufacturer is equipped with installation instructions. Our home installed the right bathroom, they service is very good, the quality is also guaranteed, cost-effective, the brand is safer.