On the issue of switch control the kitchen switch must be on for the dining room to control the kit

Updated on Kitchen 2024-07-11
6 answers
  1. Anonymous users2024-01-24

    The kitchen and dining room are skewered and can not be used The washing machine is too wet in the bathroom and is not dangerous to the ground.

  2. Anonymous users2024-01-23

    Changing the dual control switch in the dining room and kitchen can solve this problem. This means that you can control the kitchen lights in the dining room, and you can control the dining room lights in the kitchen, whether it's on or not.

    It is not possible to have a washing machine without grounding, because it has water that is easy to leak and generate static electricity, so for the sake of safety, you should still connect a 5-pin socket.

  3. Anonymous users2024-01-22

    The simple way is to find a wire, the shell of the washing machine (must be iron) or the ground wire of the plug and the water pipe and heating pipe together to prevent leakage and electric shock.

  4. Anonymous users2024-01-21

    Find the electrician who helped you pull the wire at the time! It's still an electrician to make such low-level mistakes?!

    Changing the restaurant to a double-open and dual-control switch can't solve this problem. Your electrician has added an extra switch to the control line you caused the kitchen light. This situation cannot be resolved unless you rewire it.

    The washing machine in the bathroom must be connected to the ground wire, otherwise there may be serious personal injury if the equipment leaks for a long time. The bathroom is a very humid environment, and you must not report it as a fluke.

    The method of grounding the wire will have to ask your electrician, and he will put the wire over nearby when he does the ground wire.

  5. Anonymous users2024-01-20

    Turn on the switch to see how many wires are inside, if you don't guess wrong, there should be only two, so you can change the switch with double opening and double control can not solve the problem.

    You can disassemble the two switches, and then turn the two switches to the off position, use an electric pen to measure which switch's terminal has electricity (the wire connected to the terminal with electricity is the live wire), the switch with a terminal with electricity to the open position, and then measure the two terminals of the other switch to see which one has electricity (the electric wire is the connecting wire of the two switches, and the one without electricity is the wire connected to the electric light).

    Find two wires tied to the connecting wires of the two switches, and pull them out along the conduit at the other end (the distance between the dining room and the kitchen should not be very long, and it is easy to pull). After pulling it out, there are three wires in the wire box of the two switches, and you can buy two dual-control switches and connect them (note: the live wire and the light wire should be connected to the terminal in the middle of the dual-control switch, and the other two can be connected casually).

    The shell of the washing machine is connected to the water pipe, and the washing machine is not safer than the electric water heater.

  6. Anonymous users2024-01-19

    Hi me, I'll solve it for you!

Related questions
About the wiring of the bedside switch to control the bulb
6 answers2024-07-11

Your understanding is absolutely correct! Compliance with wiring requirements also facilitates practical operation. The so-called "zero line of fire...... walk side by sideIt is a mantra of wiring rules in the textbook, and your understanding is consistent with the requirements of this mantra. >>>More

Check that the air switch is normal, but that the switch controls all the wall outlets in the kitche
4 answers2024-07-11

You first confirm that there is no problem with the power supply, and then send the switch to power, and measure the normal voltage of the switch outgoing line, that is, there is a problem with the line, and the problem must be in these three aspects.

Regarding the problem of the toilet switch, the previous decoration fooled people, and the switch wa
2 answers2024-07-11

There are back box remedial pieces that can realize your ideas, and you can also buy long screws. Taobao and JD.com have them. Not expensive.

The switch in the kitchen can not control the lights in the kitchen, but can control the lights in t
4 answers2024-07-11

The landlord should not panic, this matter should be found by the property and let them come forward to solve it, generally there is no charge. They have circuit drawings, and other electrical jobs are very dangerous, and in case of a short circuit, the property can be fined.

About the leaking switch of the toilet water pipe. I wonder if I can fix it myself, or if I need it
2 answers2024-07-11

You are an angle valve, it is better not to change it yourself, some valves are not of good quality, as soon as you screw it, it will be broken, and it will be troublesome when the time comes.