-
Anonymous users2024-01-24The solution to this situation is 1. If there is a high space to change the sewer pipe, it means that the bathroom floor is now more than 20CM lower than the floor of the corridor or room. 2. The shifter can be used before sticking the floor tiles, and the distance of the shifter can be adjusted to 6CM-8CM, and the distance is too large to be blocked. 3. If the back wall of the toilet is 24 walls, you can properly open a groove on the wall that is higher and wider than the toilet size, and then the groove should also be tiled, and the toilet can be properly installed in the groove of the wall.
Pay attention to waterproofing in place. 4. Contact the property or developer to solve the problem.
-
Anonymous users2024-01-23There are three solutions. The first is to ask the designer who designed the house.
The second is my advice to you: get out of the water.
The third is to take a look at the renderings of the bathroom on the Internet, I believe you will have a harvest.
-
Anonymous users2024-01-22There are specialized toilet lifts on the market that can solve such problems
The sewer is clogged, so hurry up and learn this trick.
You send a picture of whether your washbasin and plumbing structure are all PVC, such as the section where the sink is connected.
Use a cup of detergent and sugar and mixture! Add some baking soda to lure worms in! Don't spray exterminators! Prevent food poisoning!
The space you mentioned is a little smaller, and if you use tiles as shelves, the final space will be very small, and it will be inconvenient to place things. So I'll give you a suggestion: make a bracket of total stainless steel, the space will not shrink much, and you can place things directly. >>>More
Wrap it in woodworking boards and paint it with latex paint to look like a pillar.