-
Anonymous users2024-01-241. Find the main valve of your water pipe and turn it off. 2. Buy a faucet with the same number as your faucet. 3. Directly remove the broken faucet, and it is best to wrap it slightly with hemp rope at the screw mouth to prevent water leakage.
4. Screw on the new faucet. 5. Open the main valve of the water pipe.
-
Anonymous users2024-01-23Buy a special sleeve that can put on the nut under the faucet, so that it is easy to unscrew the faucet.
You see if it's a leak in the sink and drain joints, or if it's caused by the room temperature being too high and the water temperature being too low to solidify the bottom of the sink. If the water leaks, you can re-reinforce it, but if it solidifies at room temperature, then it's fine.
Stick a layer of rock wool or something like that on the back. Or just tape it thicker.
Buy a new sink drain wrench triangle valve raw meal belt water hose faucet hose. >>>More
Answer: Close the angle valve to cut off the water, then unscrew the two snakeskin hoses from the angle valve, remove the faucet, unscrew the hose from the faucet, and replace it with a new hose The original step is installed
I think you'd better find a professional with a sewer pipe to solve this problem, which can give you a better solution, about the problem of food waste grinder, I personally think that if the main water pipe in your room is less than 40, it is best not to use a food grinder, the water outlet of the food grinder is generally 40, and it contains places.