How to connect the kitchen drain with the main drain without leakage thank you

The length of the pipe depends on the height of the main sewer, preferably not too much lower than the main sewer.

Content expansion: 1. How to solve the blocked sewer pipe, the following provides a few tips for dredging the pipe.

1. Soda and vinegar dredging method: first pour half a cup of cooked baking soda powder into the sewer, and then pour half a cup of vinegar, and the soda can remove the sticky things in the pipe after the reaction between the soda and the acid in the vinegar.

2. Log dredging method: first insert a log with a diameter close to the drainage outlet into the water pipe, and put a certain amount of water in the pool, and quickly pump the log up and down without interruption, and the dirt in the pipeline will be washed away under the action of suction and pressure.

3. Pump dredging method: When the kitchen sewer is blocked, you can plug the hose of the pump into the sewer, and then put in a small amount of water, and constantly pump air into it, and the pipe can be dredged.

Second, the method of installing the faucet of the kitchen washing basin.

1. There is a water trap in the sewer pipe of the vegetable washing tray, which is used to prevent odor and must be installed.

2. As for no leakage, there are rubber rings in the accessories of the sewer pipe, and those rubber rings must be installed to prevent water leakage.

How to connect the sewer pipe in the kitchen with the main sewer pipe.

Remove the cover of the floor drain, and then insert the sewer pipe of the vegetable sink directly into the floor drain, which does not affect the normal use of the floor drain with water on the ground. If the lid of the floor drain cannot be removed, you can make a round hole in the center of the lid and insert the sewer pipe into it.