-
Anonymous users2024-01-24There are two main aspects of work, one is the need to connect to the power supply, and the other is to change the tap water interface (if the original tap water is used, there is no need to connect the tap water outlet, if the original reclaimed water flush toilet needs to be connected to the tap water pipe interface).
The old-fashioned siphon toilet is worse than the in-line one, but now most manufacturers of siphon toilets have optimized the S-bend sewer pipe, and the latest siphon toilet has similar water consumption to the in-line one. 2. Patency: The in-line pipeline is relatively simple, and the workmanship request is not as fine as the siphon, and the pass-through of the siphon is stronger, but the siphon toilet relies on the S bend to produce strong suction, and the flush is more and more clean. >>>More
The flush toilet is not really pumping, in fact, the tap water pipe is connected to the toilet tank through a float valve, and when the toilet tank is full, the float will resist the valve to automatically close the tap water. >>>More
Is it that there is no water or what's going on? If the toilet doesn't flush, just change it.
According to the toilet model and the size of the toilet lid installation hole, buy a smart toilet seat corresponding to the size to replace the original toilet seat.
Two scenarios:1The ground is raised, and the pipe walks on the rough ground. 2.Blank ground groove, put a 90PPR pipe and the original 110 drainage pipe to connect. The bottom of the tank is waterproof and blocked.