-
Anonymous users2024-01-24Of course, you need to install another light. If you have to turn on the bath bomb to light every time you enter the bathroom, the first is not energy-saving; The wattage of the bath bomb is more than 10 times greater than that of lighting, which is not economically cost-effective. Second; The temperature in winter is different from the temperature in summer, and if you turn on the bath bomb at night in summer, you will be roasted and suffer from heat stroke.
-
Anonymous users2024-01-23There is usually a light bulb in the middle of the bath bomb that is responsible for lighting, but the brightness is relatively low, and the illumination range is relatively small. Consider installing mirror headlights or ceiling lights. You can't use a bath bomb for lighting, first, it consumes a lot of electricity (about 1000W), and second, the temperature is very high, and you can't stand it in summer.
It is best to install lighting, bath bomb lighting has limitations, especially the washbasin is easy to backlight and inconvenient to use.
The range of bath bomb lighting is not ideal, and a mirror-like headlamp in the bathroom is still very necessary.
It may be the cause of treatment. You can find better quality ones on Taobao.
The bath bomb uses a special infrared quartz heating bulb as a heat source to heat the indoor air through direct radiation, and does not need to be preheated, so it can obtain a wide range of heating effects in an instant. Its function is heating, ventilation, lighting, using 2 or 4 275W hard quartz explosion-proof bulbs for heating, the effect is concentrated and strong, you can heat as soon as you turn on the light, no need to preheat, very suitable for people with a fast pace of life. The 2-in-1 bath bomb is specially designed for those who have installed a ventilation fan or a low bathroom, or an old house bathroom, and is characterized by easy installation. >>>More
Check whether the metal sheet in the lamp center is displaced, check whether the ballast is broken if there is a ballast, check whether the wiring is loose on the terminal on the bath bomb, and whether the wiring in the panel switch is loose, pay attention to turn off the power during operation to prevent the problem from occurring.