-
Anonymous users2024-01-24Close the main inlet valve of the toilet bowl and unscrew the connection between the braided hose and the inlet valve with a wrench. Then open the total water inlet valve and observe whether the water inlet is normal. If it is normal, check the inlet valve of the flush toilet, whether there is a filter screen, and whether the filter is blocked.
If there is a blockage, it can be normal after cleaning. If the water outlet is still small, check whether there is a blockage from the main valve to the hose.
Experience has a picture, imitation, and illustration of the balance of the branch base.
If the water valve is a flush injector, you can close the valve, open the flush injector, clean the internal valve core, dirty and sand seals are not strict, if it is a water storage tank, it is the most important to explain the current situation of water leakage or equipped with a picture in the water tank to accurately analyze and answer.
The method of removing the water inlet switch of the toilet is very simple. The first thing is to turn off the water inlet switch under the toilet tank, then put the water in the toilet tank clean, then remove the snakeskin hose at the water inlet of the water tank, and unscrew the cap from the bottom of the water inlet pipe of the water tank, and you can take the water inlet pipe and accessories out of the water tank. The tool for disassembly can be disassembled with a wrench.
If the automatic inlet valve of the toilet is damaged, it is generally unable to stop the water automatically and cause water leakage. Most of the reasons are the aging of the water-stopping rubber pad, and the water-stop rubber pad can be replaced.
Symptomatic aging of the internal parts of the water tank: If the internal parts of the water tank are aging, there is no other choice, you just need to replace the parts quickly. >>>More