-
Anonymous users2024-01-24Turn off the water inlet angle valve first, the water does not stop because your water inlet has impurities or sand, so the water sealing gasket is not tightly sealed, remove the water inlet and wash it with clean water.
My family used to be like this, you open the back of the box, there is a lid inside... Usually the overflow is because the lid attached to the ball is not properly covered, you can see that it is good to wait until it is covered.
When you pick up the toilet seat, it should be that the button to drain the water does not pop back and gets stuck there, causing the water to keep coming in.
It doesn't matter, there should be an angle valve before connecting the toilet, but if it doesn't work, you can turn off the water in the toilet! >>>More
If the toilet is always on the water, maybe it is a problem with the water tank, you can check whether the material or parts of the water tank will be too old, because some small parts are relatively unused, and it will not take long for the phenomenon of damage, if it is used for a long time, there will be problems, then it is a phenomenon of natural wear and tear, as long as it is replaced, the phenomenon of leakage on the toilet does not stop and cannot be eliminated, it may be because of the sewer pipe, because the function of the sewer pipe is used to connect the toilet tank, It is also possible for a major conveyor pipe to have this problem.
1. What is the reason why the toilet bowl does not stop being watered? >>>More