-
Anonymous users2024-01-24The general furniture waxing process mainly includes: waxing, cloth wax, hot wax, waxing, wiping, and shaking wax.
The preliminary work of spotting wax and scalding wax is to prepare for the wax to be evenly applied. Specifically, use a wax brush (three or four rows of bristle brushes) to evenly wax each part of the furniture surface.
The cloth wax is to spread the wax ordered in the previous step evenly in the heating.
Shake the wax shake the wax, also commonly known as dry bucket wax. It is to use a bristle brush, generally choose a black bristle brush with a width of 7 8 cm, a length of 12 15 cm and good hardness, but do not use wild boar bristles, because the hardness is too strong. Use the brush to shake and wipe all areas clean, including any wax in the crevices.
From all angles of the furniture, the gloss of the surface is consistent, so far the whole waxing process is completed. The hardware fittings and metal handles of mahogany furniture can be wiped and dried with a little engine oil, so that they can rotate flexibly, anti-rust and anti-oxidation.
The traditional method of wiping wax uses a small coarse cloth and pure cotton cloth, like a bath to poke and rub along the texture of furniture, not only to be strong but also to have a certain speed, when the friction process has a certain temperature, so that the wax can not be determined, so that the floating wax that has not been shoveled off can be removed, and the feel is intuitively the best. After wiping the wax, touch the furniture with your hands, and make sure that it is not sticky to wax.
-
Anonymous users2024-01-231. Remove the dust with a dry cloth and a small brush, and wipe it off with a rag that wrung out the water.
2. Use sponge blocks to spread beeswax thin and evenly on the surface of the wood.
3. After about half an hour, wipe it repeatedly with a dry cloth to show a soft shine.
4. It is recommended to wax and maintain it once a quarter, and wipe it with a dry cloth at ordinary times.
Furniture waxing is mainly to choose the connotation of natural beeswax furniture wax, which can promote the growth of slurry, professional generally use old brands, such as tiger head hotolube, old temple, B sanyuan, etc. The main thing is to look at the ingredients.
The main steps for waxing wooden furniture are:
1. When maintaining wooden furniture, the first thing to do is to remove the dust on the surface of the furniture, and when cleaning the dust, you must use two clean cotton cloths, one is wet, and the other is dry. Clean the surface with a damp cotton cloth first, and then use a dry cotton cloth to dry the water stains. The dust must be cleaned, otherwise when waxing, the dust will increase the friction between the cotton cloth and the wooden furniture, and damage its surface. >>>More
1. First of all, look at the selection of materials for the wardrobe. Professional manufacturers choose environmentally friendly plates that meet national testing standards, while some manufacturers choose inferior plates that have no test reports and pose a potential threat to human health. Therefore, to buy a wardrobe, the first thing to see is whether the merchant has a plate test report and related test certificates from the national authoritative testing department. >>>More
First of all, wipe the furniture with a clean rag, first remove the dust on the surface of the furniture, especially the places that are easy to fall dust. Then use a brush to dip an appropriate amount of Mo Luo and apply gently. Be careful not to be too sticky. >>>More
Tailor-made furniture can not only make the furniture more in line with your own taste and aesthetics, but also make the furniture more integral, whether it is style, color or function, it has great advantages. There are several main steps to customize furniture: >>>More
The process of opening a furniture franchise store is the first - the selection of the franchise project. >>>More